D-Link DGS-1510 Series Reference Manual page 664

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
-
device
lldp-med device
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display the voice VLAN configurations.
Example
This example shows how to display the voice VLAN global settings.
Switch# show voice vlan
Voice VLAN ID
Voice VLAN CoS
Aging Time
Member Ports
Dynamic Member Ports : eth1/0/1-1/0/3
Voice VLAN OUI:
OUI Address
----------------
00-01-E3-00-00-00
00-03-6B-00-00-00
00-09-6E-00-00-00
00-0F-E2-00-00-00
00-60-B9-00-00-00
00-D0-1E-00-00-00
00-E0-75-00-00-00
00-E0-BB-00-00-00
00-02-03-00-00-00
Total OUI: 9
Switch#
This example shows how to display the voice VLAN information of ports.
after the comma.
(Optional) Specifies a range of interfaces. No space is allowed
before and after the hyphen.
(Optional) Specifies to display the voice devices learned by OUI.
(Optional) Specifies to display the voice devices learned by LLDP-
MED.
: 1000
: 7
: 30 minutes
: eth1/0/1-1/0/5
Mask
-----------------
FF-FF-FF-00-00-00
FF-FF-FF-00-00-00
FF-FF-FF-00-00-00
FF-FF-FF-00-00-00
FF-FF-FF-00-00-00
FF-FF-FF-00-00-00
FF-FF-FF-00-00-00
FF-FF-FF-00-00-00
FF-FF-FF-00-00-00
661
Description
-------------
Siemens
Cisco
Avaya
Huawei&3COM
NEC&Philips
Pingtel
Veritel
3COM
User1