D-Link DGS-1510 Series Reference Manual page 510

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
Switch#show mls qos map dscp-mutation
DSCP Mutation: mutemap1
Attaching interface:
1/0/3
0
---------------------------------
00 00 01 02 03 04 05 06 07 08 09
10 10 11 12 13 14 15 16 17 18 19
20 20 21 22 23 24 25 26 27 28 29
30 08 31 32 33 34 35 36 37 38 39
40 40 41 42 43 44 45 46 47 48 49
50 50 51 52 53 54 55 56 57 58 59
60 60 61 62 63
Switch#
56-26 show mls qos queueing
This command is used to display the QoS queuing information and weight configuration for different
scheduler algorithm on specified interface(s).
show mls qos queuing [interface INTERFACE-ID [, | -]]
Parameters
interface INTERFACE-ID
,
-
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
When the optional keyword Interface is entered, the weight configuration for different scheduler (WRR
or WDRR) on the specified interface(s) will be displayed. If the interface is not specified, only the
system-wide map of CoS to queue ID is displayed.
The scheduling mode which is configured by the mls qos scheduler command determines which
weight configuration taking effect. Use the show mls qos interface scheduler command to get the
scheduling mode of an interface.
Example
This example shows how to display the QoS queuing information.
1 2 3 4 5 6 7
(Optional) Specifies the interface ID on which the weight
configuration of different scheduler.
(Optional) Specifies a series of interfaces, or separate a range of
interfaces from a previous range. No space is allowed before and
after the comma.
(Optional) Specifies a range of interfaces. No space is allowed
before and after the hyphen.
8 9
507