DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
Parameters
INTERFACE-ID
,
-
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command displays the LLDP information of each physical interface.
Example
This example shows how to display a specific physical interface's LLDP configuration.
Specifies to display the LLDP configuration for a specific interface.
Valid interfaces are physical interfaces.
(Optional) Specifies a series of physical interfaces. No spaces
before and after the comma.
(Optional) Specifies a range of physical interfaces. No spaces
before and after the hyphen.
368