D-Link DGS-1510 Series Reference Manual page 435

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
MAC Address
Authentication VLAN
Authentication State
Accounting Session ID
Authentication Username
Client IP Address
Assigned VID
Assigned Priority
Assigned Ingress Bandwidth
Assigned Egress Bandwidth
Method
State
Aging Time/Block Time
Idle Time
802.1X Authenticator State
The MAC address of authentication host.
The original VLAN of the host start authentication.
The authentication status of host.
Start: Host received, but no any authentication start.
Initialization: Authentication resource ready, but no new
authentication start.
Authenticating: Host is under authenticating.
Failure: Authentication failure.
Success: Host pass authentication.
The accounting session ID that used to do accounting after
authenticated.
It indicates the user name of host. It's not available while the host is
selected by MAC-Auth.
It indicates the address of the client associates. It's only available
while the host is selected by Web-Auth or JWAC.
Effectively assigned VLAN ID that was authorized after the host
passed authentication.
Effectively assigned priority that was authorized after the host
passed authentication.
Effectively assigned ingress that was authorized after the host
passed authentication.
Effectively assigned egress that was authorized after the host
passed authentication.
The Authentication method, such as 802.1X, MAC-Auth, Web-Auth,
JWAC, and so on.
The method authentication state.
Authenticating: Host is under authentication by this method.
Success: Host pass this method authentication.
Selected: This method's authentication result is taken and parsed
by system for the host.
Failure: Host fail at this method authentication.
No Information: Authentication info is unavailable.
Aging Time: Specifies a time period during which an authenticated
host will be kept in an authenticated state. When the aging time has
timed-out, the host will be moved back to an unauthenticated state.
Blocked Time: If a host fails to pass the authentication, the next
authentication will not start within the block time unless the user
clears the entry state manually.
Idle Time: Indicates the leftover time of an authenticated session
that will be terminated if the session sustains no activity for the
configured period of time. It is only available for WEB sessions.
Indicates the 802.1X authenticator PAE state: It can be one of the
following values:
INITIALIZE: Indicates the authenticator is initializing the state
machine and ready to authenticate the supplicant.
DISCONNECTED: Indicates that the state machine initialization has
finished, but no supplicant connects to this port.
CONNECTING: Indicates that the Switch has detected a supplicant
connecting to this port. The PAE will attempt to establish
communication with a supplicant.
AUTHENTICATING: Indicates that a supplicant is being
authenticated.
AUTHENTICATED: Indicates that the Authenticator has
432