D-Link DGS-1510 Series Reference Manual page 104

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
Use this command to clear the statistics counter related to AAA servers.
Example
This example shows how to clear AAA server counters.
Switch# clear aaa counters servers all
Switch#
This example shows how to clear AAA server counters information for all hosts in the server group
"server-farm".
Switch# clear aaa counters servers sg server-farm
Switch#
8-17 ip http authentication aaa login-authentication
This command is used to specify an AAA authentication method list for the authentication of the HTTP
server users. Use the no form of this command to reset to use the default method list.
ip http authentication aaa login-authentication {default | METHOD-LIST}
no ip http authentication aaa login-authentication
Parameters
default
METHOD-LIST
Default
By default, this default option is used.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 15.
Usage Guideline
For authentication via the method list to take effect, enable AAA first by using the aaa new-model
command. Create the method list first by using the aaa authentication login command. If the method
list does not exist, the command does not take effect, and the authentication will be done via the
default login method list.
Example
This example shows how to configure HTTP sessions to use the method list "WEB-METHOD" for
login authentication.
Switch# configure terminal
Switch(config)# aaa authentication login WEB-METHOD group group2 local
Switch(config)# ip http authentication aaa login-authentication WEB-METHOD
Switch(config)#
8-18 ip http accounting exec
This command is used to specify an AAA accounting method for HTTP server users. Use the no form
of this command to revert to the default setting.
Specifies to authenticate based on the default method list.
Specifies the name of the method list to use.
101