D-Link DGS-1510 Series Reference Manual page 535

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
This example shows how to configure the SSH timeout value to 160 seconds.
Switch# configure terminal
Switch(config)# ip ssh timeout 160
Switch(config)#
This example shows how to configure the SSH authentication retries value to 2 times. The connection
fails after 2 retry attempt fails.
Switch# configure terminal
Switch(config)# ip ssh authentication-retries 2
Switch(config)#
60-4 ip ssh server
This command is used to enable the SSH server function. Use the no form of this command to
disable the SSH server function.
ip ssh server
no ip ssh server
Parameters
None.
Default
By default, this option is disabled.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
Use this command to enable the SSH server function.
Example
This example shows how to enable the SSH server function.
Switch# configure terminal
Switch(config)# ip ssh server
Switch(config)#
60-5 ip ssh service-port
This command is used to specify the service port for SSH. Use the no form of this command to return
the service port to 23.
ip ssh service-port TCP-PORT
no ip ssh service-port
Parameters
532