D-Link DGS-1510 Series Reference Manual page 201

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
Switch # show ipv6 dhcp interface vlan1
vlan1 is in relay mode
Relay destinations:
FE80::20A:BBFF:FECC:102 via vlan2
Switch #
This example shows how to display DHCPv6 information for the interface VLAN 1 when VLAN 1 is not
in the DHCPv6 mode.
Switch# show ipv6 dhcp interface vlan1
Vlan1 is not in DHCPv6 mode
Switch#
21-7 show ipv6 dhcp relay information option
This command is used to display settings of the DHCPv6 relay information options.
show ipv6 dhcp relay information option
Parameters
None.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display the settings of the DHCPv6 relay information options.
Example
This example shows how to display the DHCPv6 relay remote ID setting.
Switch# show ipv6 dhcp relay information option
IPv6 DHCP relay remote-id
Policy : drop
Format : user-define
UDF is ascii string "userstring"
Switch#
198