D-Link DGS-1510 Series Reference Manual page 313

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
Switch# show ip source binding 10.1.1.10
MAC Address
----------------- --------------- ---------- ------------- ----- ----------
00-01-01-01-01-01 10.1.1.10
Total Entries: 1
Switch#
This example shows how to display IP Source Guard binding entries by IP address 10.1.1.11, MAC
address 00-01-01-01-01-10, at VLAN 100 on interface eth3/0/3 and learning by DHCP snooping.
Switch# show ip source binding 10.1.1.10 00-01-01-01-01-10 dhcp-snooping vlan 100
interface eth3/0/3
MAC Address
----------------- --------------- ---------- ------------- ----- -----------
00-01-01-01-01-10 10.1.1.11
Total Entries: 1
Switch#
Display Parameters
MAC Address
IP Address
Lease (sec)
Type
VLAN
Interface
35-4 show ip verify source
This command is used to display the hardware port ACL entry on a particular interface.
show ip verify source [interface INTERFACE-ID [, | -]]
Parameters
INTERFACE-ID
,
-
Default
None.
IP Address Lease(sec)
infinite
IP Address Lease(sec)
3564
The client's hardware MAC address.
The client's IP address assigned from the DHCP server or
configured by the user.
The IP address lease time.
The binding type. Static bindings are configured manually. Dynamic
binding are learned from DHCP snooping.
The VLAN number of the client interface.
The interface that connects to the DHCP client host.
(Optional) Specifies a port or a range of ports to configure.
(Optional) Specifies a series of interfaces, or separate a range of
interfaces from a previous range. No spaces are allowed before and
after the comma.
(Optional)Specifies a range of interfaces. No spaces are allowed
before and after the hyphen.
310
Type VLAN
static 100
Type VLAN
dhcp-snooping 100
Interface
eth3/0/3
Interface
eth3/0/3