D-Link DGS-1510 Series Reference Manual page 112

Gigabit ethernet smartpro switch
Hide thumbs Also See for DGS-1510 Series:
Table of Contents

Advertisement

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
Access Challenges
Acct Request
Acct Response
Retransmissions
Malformed Responses
Bad Authenticators
Pending Requests
Timeouts
Unknown Types
Packets Dropped
8-27 show tacacs statistics
This command is used to display the interoperation condition with each TACACS+ server.
show tacacs statistics
Parameters
None.
Default
None.
Command Mode
Privilege EXEC Mode or and configuration mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display statistics counters related to servers.
Example
received from this server.
The number of RADIUS Access-Challenge packets (valid or invalid)
received from this server.
The number of RADIUS Accounting-Request packets sent. This
does not include retransmissions.
The number of RADIUS packets received on the accounting port
from this server.
The number of RADIUS Request packets retransmitted to this
RADIUS server. Retransmissions include retries where the Identifier
and Acct-Delay have been updated, as well as those in which they
remain the same.
The number of malformed RADIUS Response packets received
from this server. Malformed packets include packets with an invalid
length. Bad authenticators or Signature attributes or unknown types
are not included as malformed responses.
The number of RADIUS Response packets containing invalid
authenticators or Signature attributes received from this server.
The number of RADIUS Request packets destined for this server
that have not yet timed out or received a response. This variable is
incremented when a Request is sent and decremented due to
receipt of a Response, a timeout or retransmission.
The number of timeouts to this server. After a timeout the client may
retry to the same server, send to a different server, or give up. A
retry to the same server is counted as a retransmit as well as a
timeout. A send to a different server is counted as a Request as
well as a timeout.
The number of RADIUS packets of unknown type which were
received from this server.
The number of RADIUS packets of which were received from this
server and dropped for some other reason.
109

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents