D-Link DGS-1510 Series Reference Manual page 555

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display the per port trap sending state.
Example
This example shows how to display the trap sending state for ports eth1/0/1 to eth1/0/9.
Switch# show snmp-server trap-sending interface eth1/0/1-1/0/9
Port
-------
eth1/0/1
eth1/0/2
eth1/0/3
eth1/0/4
eth1/0/5
eth1/0/6
eth1/0/7
eth1/0/8
eth1/0/9
Switch#
63-4 snmp-server
This command is used to enable the SNMP agent. Use the no form of this command to disable the
SNMP agent.
snmp-server
no snmp-server
Parameters
None.
Default
By default, this option is disabled.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
The SNMP manager manages a SNMP agent by sending SNMP requests to agents and receiving
SNMP responses and notifications from agents. The SNMP server on the agent must be enabled
before the agent can be managed.
Example
Trap Sending
-------------
Enabled
Enabled
Disabled
Enabled
Enabled
Disabled
Enabled
Enabled
Enabled
552