D-Link DGS-1510 Series Reference Manual page 356

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
-
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 12.
Usage Guideline
If this command is issued without the interface keyword, all neighboring information on all interfaces
will be cleared.
Example
This example shows how to clear all neighboring information on all interfaces.
Switch# clear lldp table all
Switch#
43-3 lldp dot1-tlv-select
This command is used to specify which optional type-length-value settings (TLVs) in the IEEE 802.1
Organizationally Specific TLV set will be transmitted and encapsulated in the LLDPDUs and sent to
neighbor devices. Use the no form of this command to disable the transmission of TLVs.
lldp dot1-tlv-select {port-vlan | protocol-vlan VLAN-ID [, | -] | vlan-name [VLAN-ID [, | -]] |
protocol-identity [PROTOCOL-NAME]}
no lldp dot1-tlv-select {port-vlan | protocol-vlan [VLAN-ID [, | -]] | vlan-name [VLAN-ID [, | -]] |
protocol-identity [PROTOCOL-NAME]}
Parameters
port-vlan
protocol-vlan
VLAN-ID [, | -]
vlan-name
VLAN-ID [, | -]
before and after the comma.
(Optional) Specifies a range of physical interfaces. No spaces
before and after the hyphen.
Specifies the port VLAN ID TLV to send. The Port VLAN ID TLV is
an optional fixed length TLV that allows a VLAN bridge port to
advertise the port's VLAN identifier (PVID) that will be associated
with untagged or priority tagged frames.
Specifies the Port and Protocol VLAN ID (PPVID) TLV to send. The
PPVID TLV is an optional TLV that allows a bridge port to advertise
a port and protocol VLAN ID.
Specifies the ID of the VLAN in the PPVID TLV. The VLAN ID range
is 1 to 4094. Separate nonconsecutive VLAN IDs with a comma.
Use a hyphen to designate a range of VLAN IDs. In the no form of
this command, the VLAN ID is optional. If no VLAN ID is specified,
all configured PPVID VLANs will be cleared and no PPVID TLV will
be sent.
Specifies the VLAN name TLV to send. The VLAN name TLV is an
optional TLV that allows an IEEE 802.1Q-compatible IEEE 802 LAN
station to advertise the assigned name of any VLAN with which it is
configured.
(Optional) Specifies the ID of the VLAN in the VLAN name TLV. The
VLAN ID range is 1 to 4094. Separate nonconsecutive VLAN ID
with a comma. Use a hyphen to designate a range of VLAN IDs. If
353