D-Link DGS-1510 Series Reference Manual page 603

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
show storm-control interface INTERFACE-ID [, | -] [broadcast | multicast | unicast]
Parameters
INTERFACE-ID
,
-
broadcast
multicast
unicast
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
If the interface ID is not specified, all interfaces configurations will be displayed.
If the packet type is not specified, all types of storm control settings will be displayed.
Example
This example shows how to display the current broadcast storm control settings.
Switch# show storm-control interface range ethernet 3/0/1-3/0/6 broadcast
Polling Interval
Interface
-----------------------------------------------------------
eth3/0/1
eth3/0/2
eth3/0/3
eth3/0/4
eth3/0/5
eth3/0/6
Total Entries: 6
Switch#
This example shows how to display all interface settings for the range from port 3/0/1 to port 3/0/2.
Specifies the port's interface ID.
(Optional) Specifies a series of interfaces, or separate a range of
interfaces from a previous range. No space is allowed before and
after the comma.
(Optional) Specifies a range of interfaces. No space is allowed
before and after the hyphen.
Specifies to display the current broadcast storm setting.
Specifies to display the current multicast storm setting.
Specifies to display the current unicast (DLF) storm setting.
: 15 sec
Action Threshold
Drop 500/300 pps
Drop 80/64 %
Drop 80/64 %
Shutdown 60/50 %
None 60000/50000 kbps
None -
Shutdown Retries
Current State
200 pps Forwarding
20 % Forwarding
70 % Dropped
20 % Forwarding
2000 kbps Forwarding
- Inactive
600
: Infinite