D-Link DGS-1510 Series Reference Manual page 242

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
The APS channel VLAN of a sub-ring instance is also the virtual channel of the sub-ring.
Example
This example shows how to configure the APS channel VLAN "2" for the ERP instance "1".
Switch(config)#ethernet ring g8032 ring1
Switch(config-erp)#instance 1
Switch(config-erp-instance)#r-aps channel-vlan 2
Switch(config-erp-instance)#
28-6 inclusion-list vlan-ids
This command is used to configure VLAN IDs protected by the ERP mechanism. Use the no form of
this command to delete the VLAN IDs.
inclusion-list vlan-ids VLAN-ID [, | -]
no inclusion-list vlan-ids VLAN-ID [, | -]
Parameters
VLAN-ID
,
-
Default
None.
Command Mode
ERP Instance Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
This command is used to add or delete VLAN IDs protected by the ERP mechanism.
Example
This example shows how to configure service protected VLAN as 100-200 for ERP instance 1.
Switch#configure terminal
Switch(config)#ethernet ring g8032 ring2
Switch(config-erp)#instance 1
Switch(config-erp-instance)#inclusion-list vlan-ids 100-200
Switch(config-erp-instance)#
28-7 instance
This command is used to create an ERP instance and enter ERP instance configuration mode. Use
the no form of this command to remove an ERP instance.
Specified the VLAN IDs protected by the ERP mechanism. The
range is 1 to 4094.
(Optional) Specifies a series of VLANs, or separate a range of
VLANs from a previous range. No spaces are required before and
after the comma.
(Optional) Specifies a range of VLANs. No spaces are required
before and after the hyphen.
239