D-Link DGS-1510 Series Reference Manual page 100

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
no aaa group server radius GROUP-NAME
Parameters
GROUP-NAME
Default
There is no AAA group server.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 15.
Usage Guideline
Use this command to define a RADIUS server group. The created server group is used in the
definition of method lists used for authentication, or accounting by using AAA authentication and AAA
accounting command. Also use this command to enter the RADIUS group server configuration mode.
Use the server command to associate the RADIUS server hosts with the RADIUS server group.
Example
This example shows how to create a RADIUS server group with two entries. The second host entry
acts as backup to the first entry.
Switch#configure terminal
Switch(config)#aaa group server radius group1
Switch(config-sg-radius)# server 172.19.10.100
Switch(config-sg-radius)# server 172.19.11.20
Switch(config-sg-radius)# exit
Switch(config)#
8-12 aaa group server tacacs+
This command is used to enter the TACACS+ group server configuration mode to associate server
hosts with the group. Use the no form of this command to remove a TACACS+ server group
aaa group server tacacs+ GROUP-NAME
no aaa group server tacacs+ GROUP-NAME
Parameters
GROUP-NAME
Default
There is no AAA group server.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 15.
Specifies the name of the server group. This name can be up to 32
characters long. The syntax is a general string that does not allow
spaces.
Specifies the name of the server group. This name can be up to 32
characters long. The syntax is a general string that does not allow
spaces.
97