D-Link DGS-1510 Series Reference Manual page 295

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
Switch# show ip igmp snooping mrouter
VLAN
-------- ----------------------------------
1
2
Total Entries: 2
Switch#
33-19 show ip igmp snooping static-group
This command is used to display IGMP snooping statistics group information on the Switch.
show ip igmp snooping static-group [GROUP-ADDRESS | vlan VLAN-ID]
Parameters
GROUP-ADDRESS
vlan VLAN-ID
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command displays the IGMP snooping static group information.
Example
This example shows how to display IGMP snooping static group information.
Switch#show ip igmp snooping static-group
VLAN ID
-------
2
Total Entries: 1
Switch#
33-20 show ip igmp snooping statistics
This command is used to display IGMP snooping statistics information on the Switch.
Ports
3/0/3-3/0/4 (static)
3/0/6 (forbidden)
4/0/2 (dynamic)
4/0/4 (static)
4/0/3 (dynamic)
(Optional) Specifies the group IP address to be displayed.
(Optional) Specifies the VLAN ID to be displayed.
Group address Interface
--------------- ------------------------
226.1.2.2 1/0/3
292