D-Link DGS-1510 Series Reference Manual page 140

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
Use this command to display the content of the debug buffer or utilization information of the debug
buffer.
Example
This example shows how to display the debug buffer information.
Switch# debug show buffer
Debug buffer is empty
Switch#
This example shows how to display the debug buffer utilization.
Switch# debug show buffer utilization
Debug buffer is allocated from system memory
Total size is 2M
Utilization is 30%
Switch#
14-8 debug show output
This command is used to display the debug status and output information of the modules.
debug show output
Parameters
None.
Default
None.
Command Mode
Privileged EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 15.
Usage Guideline
Use this command to display the information about the debug status and message output of the
modules.
Example
This example shows how to display the debug message output information of the modules.
137