D-Link DGS-1510 Series Reference Manual page 300

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
34-5 show counters
This command is used to display interface information.
show counters [interface INTERFACE-ID]
Parameters
INTERFACE-ID
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display the statistic counters for an interface.
Example
This example shows how to display the counters for interface eth1/0/1.
Specifies that the interface can be a physical port. If no interface is
specified, counters of all interfaces will be displayed.
297