D-Link DGS-1510 Series Reference Manual page 277

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
Switch# show gvrp configuration interface eth3/0/5-3/0/6
eth3/0/5
GVRP Status
Join Time
Leave Time
Leave-All Time
Advertise VLAN
Forbidden VLAN
eth3/0/6
GVRP Status
Join Time
Leave Time
Leave-All Time
Advertise VLAN
Forbidden VLAN
Switch#
31-9 show gvrp statistics
This command is used to display the statistics for a GVRP port.
show gvrp statistics [interface INTERFACE-ID [, | -]]
Parameters
INTERFACE-ID [, | -]
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command only displays the ports which have the GVRP state enabled.
Example
This example shows how to display statistics for GVRP interfaces eth3/0/5 to eth3/0/6.
: Enabled
: 20 centiseconds
: 60 centiseconds
: 1000 centiseconds
: 1-4094
: 3-5
: Enabled
: 20 centiseconds
: 60 centiseconds
: 1000 centiseconds
: 1-3
: 5-8
(Optional) Specifies the interfaces. Specify a single interface, a
range of interfaces separated by a hyphen, or a series of interfaces
separated by commas.
274