Ford Transit 2002 Owner's Manual page 1282

2. Output shaft
3. Differential
22. Fit the shims and bearing races.
1. Fit the required shims.
2. Fit the bearing races of the:
1. Input shaft
2. Output shaft
3. Differential
23. Fit the reverse gear idler wheel.
1. Lower thrust washer
2. Needle roller bearing
3. Reverse gear idler wheel (smaller collar
faces downwards)
4. Upper thrust washer
5. Snap ring
24. Install the input and output shafts together.
Coat the taper roller bearing with
transmission
25. Install selector fork.
Move the fourth gear selector ring to the
neutral position.
Insert the fifth and reverse gear selector
fork and swivel it to the side.
26. Install the third and fourth gear selector fork.
Swivel back the fifth and reverse gear
http://vnx.su
fluid.