Ford Transit 2002 Owner's Manual page 1283

selector fork.
NOTE: When fitted correctly, the selector
27.
rods are the same height.
Install the first and second gear selector fork and
selector rods.
28. Install the differential (illustration shows 1.8L
diesel engine).
1. Fit the differential.
2. Place the clean magnetic disc in the
recess.
29. Coat the mating surface with sealant.
The mating surface must be dry and free
of oil. Apply
the mating surface (even 2 mm bead of
sealant).
30. NOTE: The transmission housing must not be
turned over to tighten the bolts.
Fit the clutch-end housing section.
Tighten the 16 flange bolts within
15minutes, working diagonally.
NOTE: Make sure the transmission is in
31.
neutral (the gearshift lever and selector lever
must be vertical).
Install the selector mechanism.
The mating surface must be dry and free
of oil. Apply
http://vnx.su
sealant evenly to the inside of
sealant evenly to the outside