Optional) Configuring The Interval For Updating The Key Pair On The Ssh Server; Checking The Configuration - Huawei Quidway S2700 Series Configuration Manual

Quidway S2700 Series Ethernet Switches
Configuration Guide - Basic Configuration
Context
Do as follows on the switch that serves as an SSH server:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ssh server port port-number
The number of the port monitored by the SSH server is configured.
If a new number of a monitored port is configured, the SSH server interrupts all the STelnet and
SFTP connections and monitors the port of the new number. By default, the number of the port
monitored by the SSH server is 22.
----End
9.4.7 (Optional) Configuring the Interval for Updating the Key Pair
on the SSH Server
You can configure the interval for updating the key pair of the SSH server, which can guarantee
the security.
Context
Do as follows on the switch that serves as an SSH server:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ssh server rekey-interval interval
The interval for updating the key pair is set.
By default, the interval for updating the key pair of the SSH server is 0, which means that the
key pair is never updated.
----End

9.4.8 Checking the Configuration

After configuring the SSH server, you can view the global configuration of the SSH server.
Prerequisite
The configurations of the SSH server are complete.
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Telnet and SSH
133