Specifying The App Adopted When The Switch Starts Next Time; Updating The Bootrom - Huawei Quidway S3100 Series Operation Manual

Operation Manual – System Maintenance and Debugging
Quidway S3100 Series Ethernet Switches
Table 5-2 Enabling the Timing Reboot Function
Operation
Enable the timing reboot
function of the switch, and
set specified time and
date
Enable the timing reboot
function of the switch, and
set waiting time
Check
configuration of the reboot
terminal service of the
current switch
Note:
The precision of switch timer is 1 minute. The switch will reboot in one minute when
time comes to the specified rebooting point.

5.2.3 Specifying the APP Adopted When the Switch Starts Next Time

APP is the host software of the switch. If multiple APPs exist in the Flash memory, you
can use the command here to specify the one that will be adopted when the switch
starts next time.
Perform the following configuration in user view:
Table 5-3 Specify the APP that will be adopted when the switch starts next time
Operation
Specify
that will be adopted
when
starts next time

5.2.4 Updating the BootROM

You can use the BootROM application saved in the Flash memory of the switch to
update the running BootROM application without the need to terminate the system.
With this command, a remote user can conveniently update the BootRom by uploading
the BootROM to the switch through FTP and running this command.
Perform the following configuration in user view:
schedule
hh:mm [ mm/dd/yyyy |
yyyy/mm/dd ]
schedule reboot delay
{ hhh:mm | mmm }
the parameter
display schedule reboot
the APP
boot
[ backup-attribute ] { file-url |
the switch
device-name }
Huawei Technologies Proprietary
Chapter 5 Device Management
Command
reboot at
Command
boot-loader
5-2
Description
—
—
You can execute
display command in any
view.
Description
—
the