Enabling Information Output To The Trap Buffer - Huawei Quidway S3100 Series Operation Manual

Operation Manual – Information Center
Quidway S3100 Series Ethernet Switches

1.2.6 Enabling Information Output to the Trap Buffer

Table 1-11 lists the related configurations on the switch.
Table 1-11 Enable information output to the trap buffer
Operation
Enter system view
Enable
information center
Enable information
output to the trap
buffer
Define
information source
Set the format of
time stamp
Note:
To view debug information of specific modules, you need to set the information type as
debug in the info-center source command, and enable debugging on corresponding
modules with the debugging command as well.
Command
system-view
the
info-center enable
info-center
[ channel { channel-number
| channel-name } ] [ size
buffersize ]
info-center
{ modu-name | default }
an channel { channel-number |
channel-name } [ { log | trap
| debug } * { level severity |
state state } * ]
info-center
{ log | trap | debugging }
{ boot | date | none }
Huawei Technologies Proprietary
1-11
Chapter 1 Information Center
—
Optional
By default, the information
center is enabled.
Optional
trapbuffer
By default, the switch outputs
information to the trap buffer,
which can holds up to 256
items by default.
source
Required
Optional
This is to set the time stamp
timestamp
format
information output.
This determines how the time
stamp is presented to users.
Description
for log/debug/trap