Enabling The First-Time Authentication On The Ssh Client - Huawei Quidway S2700 Series Configuration Manual

Quidway S2700 Series Ethernet Switches
Configuration Guide - Basic Configuration
No.
1
2
3
4
5
6
7
8
9

9.5.2 Enabling the First-Time Authentication on the SSH Client

After the first-time authentication on the SSH client is enabled, the STelnet client does not check
the validity of the RSA public key when logging in to the SSH server for the first time.
Context
If the first-time authentication on the SSH client is enabled, the STelnet client does not check
the validity of the RSA public key when logging in to the SSH server for the first time. After
the login, the system automatically allocates the RSA public key and saves it for authentication
in next login.
To simplify user operations, you are recommended to enable the first-time authentication on the
SSH client.
Do as follows on the switch that serves as an SSH client:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ssh client first-time enable
The first-time authentication on the SSH client is enabled.
By default, the first-time authentication on the SSH client is disabled.
Issue 01 (2011-07-15)
Data
Name of the SSH server
Number of the port monitored by the SSH server
Preferred encrypted algorithm from the STelnet client to the SSH server
Preferred encrypted algorithm from the SSH server to the STelnet client
Preferred HMAC algorithm from the STelnet client to the SSH server
Preferred HMAC algorithm from the SSH server to the STelnet client
Preferred algorithm of key exchange
Name of the outgoing interface
Source address
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Telnet and SSH
135