Applying A Multicast Profile To A Vlan; Checking The Configuration - Huawei Quidway s3700 series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Multicast
multicast-preview minutes minutes
Set the period for a user to preview a multicast group each time.
Step 8 Run:
multicast-preview times times
Set the number of times for a user to preview a multicast group each day.
----End

4.3.5 Applying a Multicast Profile to a VLAN

Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
vlan vlan-id
The VLAN view is displayed.
Step 3 Run:
attach multicast-profile profile-name [ interface interface-type interface-number
| mac-address mac-address ]
The binding relationship is set between the VLAN and the multicast profile.
By default, the binding relationship between the VLAN and the multicast profile is not set in
S3700.
Multiple multicast profiles can be bound to users in a VLAN.
----End

4.3.6 Checking the Configuration

Procedure
Step 1 Run the display multicast-group [ group-name ] command to check information about a
multicast group.
Step 2 Run the display multicast-list [ list-name ] command to check information about a multicast
group list.
Step 3 Run the display multicast-profile [ profile-name [ verbose ] ] command to check information
about a multicast profile.
Issue 01 (2011-10-26)
NOTE
The S3700 supports the port+VLAN multicast control mode. To configure the multicast service for multiple
user interfaces in the same VLAN, you need to specify a multicast profile for each interface individually
by specifying the interface interface-type interface-number parameter.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
*
4 Controllable Multicast Configuration
63