NEC Univerge SV8100 Features And Specifications Manual page 36

Issue 1.0
Account Code Capacity
Account Codes print along with the other call data on the SMDR record after the call completes. Account
Codes can have 1~16 digits using 0~9 and
Redialed Numbers Do Not Contain Account Codes
When using the Last Number Redial, Save or Repeat Dial features, the system does not retain Account
Code information. Any number redialed with these features, the user needs to reenter an Account Code.
If a user enters 12345 203 926 5400 67890 , if the Last Number Redial feature is used, the system dials the number as
203 926 5400 67890 . The 67890 is not treated as an Account Code.
Conditions
If a user enters a code that exceeds 16 digits, the system ignores the Account Code Entry.
If the system has Account Codes disabled, the digits dialed (e.g., 1234 ) appear on the
SMDR report as part of the number dialed.
If using Forced Account Code with single line telephone you need a VRS to get the prompts
to enter the Forced Account Code.
When you use Forced Account Code on only toll calls, and you dial a local call, you hear a
beep.
Speed Dial – System/Group/Station bins can contain stored Account Codes. They can be
prevented from being displayed using Program 20-07-04.
To simplify Account Code Entry, store the Account Code (e.g., 1234 ) in a One-Touch Key.
Just press the key instead of dialing the codes.
Account Codes appear on the SMDR report (even if they are hidden on the telephone
display).
Do not use an asterisk in a PBX/CTX access code when using Account Codes. The ,
causes the trunk to stop sending digits to the central office until another
Account Codes for incoming calls are not available for single line telephones.
Default Settings
Account Codes are disabled.
System Availability
Terminals
Any Station
2 - 12
. Verified Account Codes can have 3~16 digits.
#
Account Code – Forced/Verified/Unverified
UNIVERGE SV8100
is entered.