4
Software Configuration
6. Click Apply or OK to save your work.
7.
Support mode
You can configure support settings to allow enhanced diagnostics.
Configuring support mode settings
To configure support mode settings, complete the following steps.
1. Select Server > Options.
2. Select Support Mode in the Category list to enable or disable support modes.
FIGURE 54
128
NOTE
Changes to this option take effect after application restart.
Click OK on the "changes take effect after application restart" message.
The Options dialog box displays
NOTE
Only use this option when directed to by customer support.
Options dialog box (Support Mode option)
(Figure
54).
Brocade Network Advisor SAN User Manual
53-1002167-01