13
Adapter software
Adapter software
The Adapter Software dialog box allows you to perform the following tasks:
•
•
This feature is available for hosts that are disovered through the Host Connectivity Manager (HCM)
agent with driver version 2.3.0.0 and higher.
To update the drivers to selected hosts, complete the following steps:
1. Select Host > Adapter Software from the Configure menu.
2. Select one or more hosts from the Available Hosts list and click the right arrow button to move
3. Select one or more hosts from the Selected Hosts list. You can select mutliple hosts, but if the
4. Select the host's corresponding driver to update from the Driver to Update list. Once the driver
314
Select and import a driver file or delete existing drivers from the driver repository
Update the driver to the hosts.
The Adapter Software dialog box, Driver tab, shown in
FIGURE 107
Adapter Software dialog box, Driver tab
the selected hosts to the Selected Hosts list.
selected host count is greater than 20, a batch of 20 hosts is initiated for the driver update
first and the remaining hosts are queued.
has been selected for each host, click Update .
Alternatively, you can select one or more hosts from the Selected Hosts list and click Select
Latest to automatically select the latest operating system-specific driver for each selected host.
If you want to import a driver from another location, follow the instructions in
repository"
on page 315.
Figure
107, displays.
"Driver
Brocade Network Advisor SAN User Manual
53-1002167-01