18
Master keys
FIGURE 250
4. Select File as the Backup Destination.
5. Enter a file name, or browse to the desired location.
6. Enter the passphrase, which is required for restoring the master key. The passphrase can be
7.
8. Click OK.
Save the passphrase. This passphrase is required if you ever need to restore the master key from
the file.
Saving a master key to a key vault
Use the following procedure to save the master key to a key vault.
1. Select Configure > Encryption from the menu task bar.
2. Select a group from the Encryption Center Devices table, then select Group > Security from the
3. Select Backup Master Key as the Master Key Action.
542
Backup Destination (to file) dialog box
between eight and 40 characters, and any character is allowed.
Re-enter the passphrase for verification.
The Encryption Center dialog box displays
menu task bar, or right-click a group and select Security.
The Encryption Group Properties dialog box displays with the Security tab selected.
The Backup Master Key for Encryption Group dialog box displays
(Figure
153).
(Figure
Brocade Network Advisor SAN User Manual
251).
53-1002167-01