Brocade Communications Systems Brocade 8/12c User Manual page 884

Brocade network advisor san user manual v11.1x (53-1002167-01, may 2011)
Hide thumbs Also See for Brocade 8/12c:
Table of Contents

Advertisement

29
Policy monitor scheduling
Configuring an hourly policy monitor schedule
To configure an hourly schedule, complete the following steps.
1. Select Hourly from the Frequency list.
2. Select the minute past the hour you want deployment to run from the Minutes past the hour
3. Click OK on the Schedule Properties dialog box.
Configuring a daily policy monitor schedule
To configure a daily deployment schedule, complete the following steps.
1. Select Daily from the Frequency list.
2. Select the time of day you want deployment to run from the Time (hh:mm) lists.
3. Click OK on the Schedule Properties dialog box.
Configuring a weekly policy monitor schedule
To configure a weekly schedule, complete the following steps.
1. Select Weekly from the Frequency list.
2. Select the time of day you want deployment to run from the Time (hh:mm) lists.
3. Select the day you want deployment to run from the Day of the Week list.
4. Click OK on the Schedule Properties dialog box.
840
list.
Where the minute value is from 00 through 59.
To finish configuring the policy monitor, return to one of the following procedures:
To add policy monitor, refer to
To edit policy monitor, refer to
Where the hour value is from 0 through 12, the minute value is from 00 through 59, and the
day or night value is AM or PM.
To finish configuring the policy monitor, return to one of the following procedures:
To add policy monitor, refer to
To edit policy monitor, refer to
Where the hour value is from 0 through 12, the minute value is from 00 through 59, and the
day or night value is AM or PM.
To finish configuring the policy monitor, return to one of the following procedures:
To add policy monitor, refer to
To edit policy monitor, refer to
step 7
of
"Adding a policy monitor"
step 7
of
"Editing a policy monitor"
step 7
of
"Adding a policy monitor"
step 7
of
"Editing a policy monitor"
step 7
of
"Adding a policy monitor"
step 7
of
"Editing a policy monitor"
Brocade Network Advisor SAN User Manual
on page 828.
on page 833.
on page 828.
on page 833.
on page 828.
on page 833.
53-1002167-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Network advisor 11.1.xBrocade bladesystem 4/24

Table of Contents