Brocade Communications Systems Brocade 8/12c User Manual page 476

18
Smart card usage
1. Select Configure > Encryption from the menu task bar.
2. Select an encryption group from the Encryption Center Devices table, then select Group >
FIGURE 154
3. Locate the Authentication Card Quorum Size and select the quorum size from the list.
4. Click Register from Card Reader to register a new card.
432
The Encryption Center dialog box displays
Security from the menu task bar, or right-click an encryption group and select Security.
The Encryption Group Properties dialog box displays with the Security tab selected
(Figure 154).
Encryption Group Properties dialog box - registering authentication cards
The quorum size is the minimum number of cards necessary to enable the card holders to
perform the security sensitive operations listed above. The maximum quorum size is five cards.
The actual number of authentication cards registered is always more than the quorum size, so
if you set the quorum size to five, for example, you will need to register at least six cards in the
subsequent steps.
NOTE
Ignore the System Cards setting. Refer to
on its usage.
The Add Authentication Card dialog box displays
(Figure 153).
"Tracking smart cards" on page 437 for information
(Figure 155).
Brocade Network Advisor SAN User Manual
53-1002167-01