Restoring A Master Key From A Key Vault - Brocade Communications Systems Brocade 8/12c User Manual

18
Master keys
4. Choose the active or alternate master key for restoration, as appropriate. Refer to
5. Select File as the Restore From location.
6. Enter a file name, or browse to the desired location.
7.
8. Click OK.

Restoring a master key from a key vault

Use the following procedure to restore the master key from a key vault:
1. Select Configure > Encryption from the menu task bar.
2. Select a group from the Encryption Center Devices table, then select Group > Security from the
3. Select Restore Master Key as the Master Key Action.
FIGURE 254
4. Choose the active or alternate master key for restoration, as appropriate. Refer to
5. Select Key Vault as the Restore From location.
546
master key" on page 540 and
information on active and alternate master keys.
Enter the passphrase. The passphrase that was used to back up the master key must be used
to restore the master key.
The Encryption Center dialog box displays
menu task bar, or right-click a group and select Security.
The Encryption Group Properties dialog box displays with the Security tab selected.
The Restore Master Key for Encryption Group dialog box displays
Select a Master Key to Restore (from key vault) dialog box
master key" on page 540 and
information on active and alternate master keys.
"Alternate master key" on page 540 if you need more
(Figure 153).
"Alternate master key" on page 540 if you need more
"Active
(Figure 254).
"Active
Brocade Network Advisor SAN User Manual
53-1002167-01