18
Adding target tape LUNs for encryption
FIGURE 240
4. Click Add.
FIGURE 241
5. Select a host from the Host list.
530
Encryption Target Tape LUNs dialog box
The Add Encryption Target Tape LUNs dialog box displays
a table of all LUNs in the storage device that are visible to hosts. LUNs are identified by the
Host world wide name, LUN number, Volume Label Prefix number, and Enable Write Early ACK
and Enable Read Ahead status.
Add Encryption Target Tape LUNs dialog box
Before you encrypt a LUN, you must select a host, then either discover LUNs that are visible to
the virtual initiator representing the selected host, or enter a range of LUN numbers to be
configured for the selected host.
(Figure
241). The dialog box includes
Brocade Network Advisor SAN User Manual
53-1002167-01