Viewing the port auto disable status
NOTE
The device must be running Fabric OS 6.3 or later.
To view the port auto disable status, complete the following steps.
1. Select Configure > Port Auto Disable.
2. Select one of the followingfrom the Show list to determine what ports to display:
3. Review the port status and other information:
Brocade Network Advisor SAN User Manual
53-1002167-01
The Port Auto Disable dialog box displays.
FIGURE 105
Port Auto Disable dialog box
•
All Ports (default)
•
Disabled PAD Ports
•
Enabled PAD Ports
•
Blocked Ports
•
Products/Ports tree—Displays devices and associated ports. Also, displays a Warning icon
for blocked FC ports (displayed with the port icon).
•
Port Auto Disable—Displays whether Port Auto Disable is currently enabled or disabled.
•
Port Block Status—Displays whether the port is currently blocked.
10
Port Auto Disable
287