4. Select the target port from the Target Port table.
5. Click Next.
FIGURE 235
6. Select the initiator port from the Initiator Port table.
7.
Brocade Network Advisor SAN User Manual
53-1002167-01
The Select Initiator Port dialog box displays
Select Initiator Port dialog box
Click Next.
LUN discovery is launched and a progress bar displays. There are four possible outcomes:
-
A message displays indicating no LUNs were discovered. Click OK to dismiss the message
and exit the wizard.
-
A message displays indicating LUNs have been discovered, but are already configured.
Click OK to dismiss the message and exit the wizard.
-
A message displays indicating that the target is not in the right state for discovering LUNs.
Click OK to dismiss the message and exit the wizard.
-
The Select LUN dialog box displays. The dialog box lists discovered LUNs that are available.
Select the LUN from LUN list.
Adding target disk LUNs for encryption
(Figure
235).
18
523