10
Firmware management
Download firmware
NOTE
Non-disruptive firmware download (HCL) is not supported when downgrading from Fabric OS
version 6.2 to 6.1. You must remove all non-default logical switches and disable Virtual Fabrics
before downgrading.
NOTE
You cannot use Fabric OS firmware download with command line options in the Management
application.
You can download firmware using the Firmware Management dialog box.
1. Select Configure > Firmware Management.
2. Select the Download tab
3. Select one or more switches from the Available Switches table.
4. Click the right arrow to move the switches to the Selected Switches table.
5. Select a specific version from the Firmware to Download column, or use Select Latest to
262
The Firmware Management dialog box displays.
(Figure
FIGURE 99
Firmware download
If you selected any switches that do not support firmware download, a message displays. Click
OK on the message.
The switches that support firmware download display in the Selected Switches table.
automatically select the latest version.
If you have your FTP or SCP Server configured to use an external FTP or SCP Server, the
Firmware to Download column is empty.
99).
Brocade Network Advisor SAN User Manual
53-1002167-01