Feature Support; Supported Features - Brocade Communications Systems PowerConnect B-RX Release Note

Enhancement
Enhancement in ACL
Support

Feature support

The following is a list of all the features supported on the BigIron RX switches. See
features, for features not supported.

Supported features

The following table lists the features supported on the BigIron RX switches.
Category
System level features
•
Cisco Discovery Protocol (CDP)
•
CLI Logging
•
Denial of Service (DoS) protection
•
Foundry Discovery Protocol (FDP)
•
High Availability
•
Management Options
IronWare Software Release 02.8.00a for Brocade BigIron RX Series Swtches
Release Notes v 1.0
Description
Brocade RX devices now support IPv4 and IPv6
ACLs on the same interface
Table 2: Supported features for Release 02.8.00
Feature description
Allows you to configure a Brocade device to intercept and display the
contents of CDP packets. This feature is useful for learning device and
interface information for Cisco devices in the network.
Allows the logging of all valid CLI commands from each user session into
the system log.
Protection from SYN attacks
Protection from Smurf attacks
Enables Foundry devices to advertise themselves to other Foundry devices on
the network.
OS Layer 2 Hitless Software Upgrade
Serial and Telnet access to industry-standard Command Line Interface (CLI)
Secure Shell (SSH) version 2 (v2)
TFTP
Web-based GUI
SNMP (Version 1,Version 2, and Version 3)
IronView Network Manager
Described in
Book: BigIron RX Series Configuration
Guide
Unsupported
Page 7 of 40