Viewing A Policy Monitor Report - Brocade Communications Systems Brocade 8/12c User Manual

29

Viewing a policy monitor report

Viewing a policy monitor report
To view an existing (must have been run at least once) policy monitor report, complete the following
steps.
1. Select Monitor > Policy Monitor.
2. Select the policy for which you want to view a report in the Monitors table.
3. Click Report.
4. Review the report details.
838
The Policy Monitor dialog box displays.
The Policy_Name - Policy Monitor Report displays in a web browser.
FIGURE 368 Policy_Name
- Policy Monitor Report
When a policy status fails or partially fails, the status is highlighted in pink.
•
Fabric Checks—Displays the Fabric Name and Status of the policy check for the following
options:
Fabric - Check zoning is Enabled/Disabled (depends on your setting)

Fabric - Check that all zones belong to at least one zone config

Fabric - Check the number of initiator ports zoned to each storage port is less than

Configured_Value
Brocade Network Advisor SAN User Manual
53-1002167-01