FIGURE 50
Memory allocation
You can configure memory allocation for the client and server to improve performance. You can
trigger switch polling when a state changes or you can poll at intervals when no state change
occurs.
NOTE
SAN size is a consideration in selection of polling periods.
Configuring memory allocation settings
To configure memory allocation settings, complete the following steps.
1. Select Server > Options.
2. Select Memory Allocation in the Category list to set the memory allocation for the server and
3. (Enterprise only) In the SAN Network Size is list, complete the following steps:
Brocade Network Advisor SAN User Manual
53-1002167-01
Options dialog box (IP Preferences option)
The Options dialog box displays.
client.
a. Select the size of the SAN (small, medium, or large) you want to configure.
Memory and asset polling values change to the new default values when you change the
SAN Network size. You may increase these values.
Default values for SAN only Server
Server Heap Size
Software Configuration
4
119