Brocade Communications Systems Brocade 8/12c User Manual page 385

Configuring LLDP for FCoE
To configure LLDP for FCoE, complete the following steps.
1. Select Configure > DCB.
2. Select the switch to edit in the DCB Ports and LAGs table and click Edit.
3. Click the LLDP-DCBX tab.
4. The Edit Switch - LLDP-DCBX tab dialog box displays.
5. Select the <Global Configuration> LLDP profile in the LLDP Profiles table.
6. Click the left arrow button to edit.
7.
8. Click OK after changing the attributes of the current deployment.
9. Click Start on the Deployment Status dialog box to save the changes to the switch.
10. Click Close to close the dialog box.
Brocade Network Advisor SAN User Manual
53-1002167-01
The DCB Configuration dialog box displays.
The Edit Switch dialog box displays.
FIGURE 119
DCB Edit Switch dialog box - LLDP-DCBX tab
Select the FCoE Application and FCoE Logical Link check boxes in the Advertise table to
advertise them on the network.
The Deploy to Products dialog box displays.
The Deployment Status dialog box launches.
14
Switch policies
341