19
Zoning configuration
Refreshing a zone database
1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select a zone database from the Zone DB list.
4. Select Refresh from the Zone DB Operation list.
5. Click OK.
Merging two zone databases
If a zone or zone configuration is merged, the resulting zone or zone configuration includes all
members that were marked for addition or removal as well as all members not otherwise marked.
1. Select Configure > Zoning > Fabric.
2. Select Compare from the Zone DB Operation list.
598
The Zoning dialog box displays.
A message displays informing you that refresh will overwrite the selected database. Click Yes to
continue.
A message displays informing you that any zones or zone configurations you have changed will
be saved in the zone database, and warning you to make sure no other user is making changes
to the same areas.
The Zoning dialog box displays.
The Compare/Merge Zone DBs dialog box displays, as shown in
Figure
280.
Brocade Network Advisor SAN User Manual
53-1002167-01