Replacing an encryption engine in an encryption group
To replace an encryption engine in an encryption group with another encryption engine within the
same DEK Cluster, complete the following steps:
1. Select Configure > Encryption from the menu task bar.
2. Select an encryption engine from the Encryption Center Devices table, then select Engine >
FIGURE 220
3. Select the engine to replace from the Engine list.
4. Select the engine to use as the replacement from the Replacement list.
5. Click Replace.
Brocade Network Advisor SAN User Manual
53-1002167-01
The Encryption Center dialog box displays.
Replace from the menu task bar, or right click an encryption engine and select Replace.
The Encryption Group Properties dialog box displays with the Engine Operations tab selected
(Figure
220).
You can also display the Engine Operations tab by selecting an encryption group from the
Encryption Center Devices table, selecting Group > Properties from the menu task bar, then
selecting the Engine Operations tab, or right-click the group, select Properties, then select the
Engine Operations tab.
Engine Operations tab
All containers hosted by the current engine (Engine list) are replaced by the new engine
(Replacement list).
Replacing an encryption engine in an encryption group
18
509