Viewing Port Optics - Brocade Communications Systems Brocade 8/12c User Manual

10
Ports

Viewing port optics

NOTE
QSFP ports do not display in the Port Optics dialog box.
To view port optics, complete the following steps.
1. Right-click the switch for which you want to view port optic information on the Connectivity Map
FIGURE 104
2. Review the port optics information.
284
and select Port Optics (SFP).
The Port Optics (SFP) dialog box
Port Optics dialog box
•
Combined Status—Displays the current status of the port.
NOTE
Requires a 16 Gbps capable port running Fabric OS 7.0 or later.
NOTE
The device must have a Fabric Watch license and threshold monitoring configured for the
port. For more information, refer to the Fabric Watch Administrator's Guide.
If the port is online and port monitoring is active, displays the current status of the port
based on these five parameters: Transceiver Temp (C), Rx Power, Tx Power, Transceiver
Current (mAmps), and Voltage (mVolts).
If the port is offline, displays the current status of the port based on these two parameters:
Transceiver Temp (C) and Voltage (mVolts).
displays(Figure 104).
Brocade Network Advisor SAN User Manual
53-1002167-01