Searching For A Device By Wwn - Brocade Communications Systems Brocade 8/12c User Manual

4
SAN Names
4. Enter the name you want to search for in the Search field.
5. Click Search.
6. Click OK to close the Configure Names dialog box.

Searching for a device by WWN

You can search for objects (switch, fabric, product, ports, or N Ports) by WWN (world wide name). To
search for a WWN in the Connectivity Map, refer to
To search by WWN, complete the following steps.
1. Select Configure > Names.
2. Select All Names from the Display list.
3. Select WWN from the Scope list.
4. Enter the WWN you want to search for in the Search field.
5. Click Search.
6. Click OK to close the Configure Names dialog box.
106
You can search on partial names.
NOTE
To search for a device, the device must be discovered and display in the topology.
All devices with the specified name (or partial name) are highlighted in the Display table. You
may need to scroll to see all highlighted names.
If the search finds no devices, a 'no item found' message displays.
The Configure Names dialog box displays.
You can search on partial WWNs.
NOTE
To search for a device, the device must be discovered and display in the topology.
All devices with the specified WWN (or partial WWN) are highlighted in the Display table. You
may need to scroll to see all highlighted WWNs.
If the search finds no devices, a 'no item found' message displays.
"Searching for a device" on page 193.
Brocade Network Advisor SAN User Manual
53-1002167-01