14
LLDP-DCBX configuration
4. Click Assign an LLDP profile to <port name> button to enable the feature.
5. Select an LLDP profile from the Available Profiles list.
6. When you have finished the configuration, click OK to launch the Deploy to Ports/LAGs dialog
370
FIGURE 132
Assign an LLDP profile dialog box
NOTE
Assign the Global Configuration is the default. The Available Profiles list is disabled if global
configuration is selected. In addition, the Assign an LLDP profile button is disabled if no LLDP
profiles exist on the switch.
box. Refer to
"Product, Port, and LAG Deployment"
on page 373 for more information.
Brocade Network Advisor SAN User Manual
53-1002167-01