Deleting A L2 Acl Configuration From The Switch - Brocade Communications Systems Brocade 8/12c User Manual

3. Click Yes on the confirmation message.
4. Click OK on the Device_Name - L2 ACL Configuration dialog box.

Deleting a L2 ACL configuration from the switch

To delete a L2 ACL configuration from the switch, complete the following steps.
1. Select the device and select Configure > Security > L2 ACL > Product.
2. Select the Incremental option as the configuration type.
3. Select Delete from the Operation list for the L2 ACL configuration you want to delete.
4. Click OK on the Device_Name - L2 ACL Configuration dialog box.
Brocade Network Advisor SAN User Manual
53-1002167-01
NOTE
The L2 ACL configuration is not deleted from the switch until you deploy the configuration to
the switch.
The Deploy to Products - L2 ACL dialog box displays. To save the configuration, refer to
a security configuration deployment"
The Device_Name - L2 ACL Configuration dialog box displays.
NOTE
The L2 ACL configuration is not deleted from the switch until you deploy the configuration to
the switch.
The Deploy to Products - L2 ACL dialog box displays. To save the configuration, refer to
a security configuration deployment"
Layer 2 access control list management
on page 402
on page 402
15
"Saving
"Saving
399