Configuring Event Action E-Mail Settings - Brocade Communications Systems Brocade 8/12c User Manual

30
Event action definitions

Configuring event action e-mail settings

The Action Group - E-mail Settings pane of the Add Event Action dialog box, shown in
allows you to select e-mail recipients from a list, add new e-mail recipients, and compose e-mail
messages.
1. (Optional) Select the Management application user to whom the e-mail message will be sent
2. Add additional e-mail recipient addresses in the Other Recipients field. Separate multiple
3. If you want the e-mail message for the alert to display a description on the subject line, enter
4. If you want a prologue to be inserted at the beginning of the e-mail message, enter up to 255
5. If you want an epilogue to be placed at the end of the e-mail message, enter up to 255
878
FIGURE 391
Action Group - E-mail Settings pane of the Add Event Action dialog box
from the Available Recipients list, and click the right arrow button to move the recipient to the
Selected Recipients list.
NOTE
Make sure the user you select has an e-mail address defined in a user account.
e-mail addresses with a semicolon. At least one e-mail address must be specified by either
selecting an available recipient from the list
the text in the Subject Line field.
characters in the Body Prologue field. The event action message follows the prologue.
characters in the Body Epilogue field.
NOTE
The prologue, the event action message, and the epilogue form the body of the e-mail alert.
(step 1) or typing an e-mail recipient.
Brocade Network Advisor SAN User Manual
Figure 391,
53-1002167-01