Deleting One Or More Fcoe Login Groups - Brocade Communications Systems Brocade 8/12c User Manual

3. Change the name of the login group.
4. Perform one of the following editing tasks:
5. Select available members from the Products/Ports list and click the right arrow button to move
6. Click OK.
7.
8. Click Start to apply the changes, or click Close to abort the operation.
•

Deleting one or more FCoE login groups

1. Select Configure > FCoE from the menu bar.
2. Select a group from the Login Groups list and click Delete.
3. Review the changes carefully before you accept them.
4. Click Start to apply the changes, or click Close to abort the operation.
•
Brocade Network Advisor SAN User Manual
53-1002167-01
NOTE
The Fabric field and the Switch field are read-only fields.
•
Rename the login group by entering the new name into the Name field. The Allow All option
must be selected to rename the login group.
•
Select one of the following options to add or remove login members into the Available
Members list. The Allow Specific option must be selected to add or remove login members.
•
Port WWN—Click to enter the world wide name (WWN) of the port to associate with the
selected switch. The member port WWN text field allows a maximum of 16 digits.
•
Managed CNAs—Click to show a list of products and ports which can be selected as
login group members.
the available members to the Selected Members list.
The FCoE Login Group Confirmation and Status dialog displays.
Review the changes carefully before you accept them.
On closing the FCoE Login Group Confirmation and Status dialog box, the FCoE Configuration
Dialog refreshes the data and the latest information is displayed.
"FCoE login groups"
or
Right-click the DCB device and select FCoE.
The FCoE Configuration dialog box displays.
The FCoE Login Group Confirmation and Status dialog displays.
The login group is removed from the Login Group table.
"FCoE login groups"
14
FCoE login groups
383