Displaying end-to-end monitor pairs in a real-time graph
To display an end-to-end monitor pair in a graph, complete the following steps.
1. Select Monitor > Performance > End-to-End Monitors.
2. Select one or more end-to-end monitor pairs you want to view from the Monitored Pairs table.
3. Click Real-Time Graph.
Displaying end-to-end monitor pairs in a historical graph
To display monitored pairs in a historical graph, data collection must be enabled for the selected
fabric or enabled SAN wide.
To display an end-to-end monitor pair in a graph, complete the following steps.
1. Select Monitor > Performance > End-to-End Monitors.
2. Select one or more end-to-end monitor pairs you want to view from the Monitored Pairs table.
3. Click Historical Graph.
Refreshing end-to-end monitor pairs
The Management application enables you to rewrite the end-to-end monitors (deleted through CLI
or an Element Manager) back to a device.
To refresh all end-to-end monitor pairs, complete the following steps.
1. Select Monitor > Performance > End-to-End Monitors.
2. Click Refresh.
3. Click OK.
Brocade Network Advisor SAN User Manual
53-1002167-01
The Set End-to-End Monitor dialog box displays.
You can select up to 32 monitored pairs.
The Real Time Performance Graphs dialog box displays.
The Set End-to-End Monitor dialog box displays.
You can select up to 100 monitored pairs.
The Historical Performance Graph dialog box displays.
The Set End-to-End Monitor dialog box displays.
All end-to-end monitor pairs are rewritten back to any devices where the end-to-end monitor
pairs were deleted through CLI or an Element Manager.
SAN End-to-end monitoring
27
795