1. Log in to the Thales management program as admin and select the Network tab
FIGURE 169
2. Enter the management IP address information under Management Interface.
3. Enter the client IP address information under KM Server Interface.
4. Enter a host name for the appliance, Internet or intranet domain, and, if used, the primary and
5. Set Service Settings.
Brocade Network Advisor SAN User Manual
53-1002167-01
TEMS Network Settings
secondary DNS IP address under Common Settings.
-
HTTPS Port 433
-
SSH Port 22
-
Enable SSH
-
KM Server Port 9000
-
Enable KM Server
Steps for connecting to a TEMS appliance
18
(Figure
169).
465